David Ingram
whitecavy
Location: Columbus, Ohio
Joined: Friday, February 22, 2002
Last Update: Monday, August 1, 2016
Last Seen: Monday, March 20, 2017
Email: greeneyez614@yahoo.com
2002 Chevrolet CavalierAbout This Vehicle:
Powered by counter.bloke.com
2.4L Fully built with forged internals is now in the car :) Body Style: Coupe Color: GM Ultra Silver Engine: 2.4L LD9 Transmission: Manual Interior: Stock
Manufacturer Options
- 328whp and 286 wtq
13.07 109.16 mph in the 1/4 mile
MODIFICATIONS
Engine:- • Polished Garrett GT3071R
• Water cooled turbo
• Hot temp coated CCfab turbo manifold
• Hot temp coated 3" downpipe
• 3" turbo back exhaust
• QTP manual exhaust cutout
• HKS SSQ BOV
• 30X8X3 Intercooler
• Hot temp coated dump tube
• Tial 44mm purple Waste gate
•
• NGK TR6 spark plugs
• Ross Machine Racing sheet metal Intake manifold
• Ross Machine Racing velocity stacks
• Ross machine Racing LS1 throttle body flange
• 2.4 Fetter Intake flange
• Stainless steel intake and throttle body bolts
• LS1 ported and polished throttle body
• Vacuum manifold
•
• AEM IAT screw in sensor + plug
• 2.5" Polished Charge pipes
• 3” Polished cold side charge pipes
• HP tuned
• AEM UEGO Wideband
• Boost gauge
• All custom nylon wrapped sleeves on all the wires
•
• Ported and polished head
• 3 angle valve job
• deck shaved
• SS valves
• bronze valve guides
• ARP head studs
• ARP Main studs
• Cometic .030 NA head gasket
• GM 2.4 Keepers
• 2.3 springs
• 2.3 Titanium hybrid retainers
• 2.3 lifters
• 2.3 HO Intake cam modified for PS
• 2.3 HO Exhaust cam
• •
• Racetronix fuel pump harness
• Aeromotive AFPR
• 1100cc ev14 FIC high impedance injectors
• Fuel pressure gauge
• SS Braided -6 return
• SS Braided -6 feed line from firewall
•
• Block deck shaved
• block bored .020
• blue printed and balanced
• crank polished and lightened
• 2.3L oil pump conversion
• Wiseco 9:1 pistons
• Eagle H-beam connecting rods
• ARP main bolts
• Clevite 77 rod and main bearings
•
• TurboTechRacing Powder coated black upper solid mount
• Carcustoms lower mount
• MDLD9 lightened crank and alt pulley
•
• Rksport oil cooler
• Polished 160 amp alternator
• Polished MRZ caps
• all new seals
• new gaskets
• new hoses etc
• Removed a/c system
• 160 degree thermostat
Suspension/Wheels/Brakes:- TEIN basic coilovers with 2" lower springs in the rear
- Baer 13" front brake kit
- Neon rear disk conversion(NOT installed)
- F-Body 2.5" ARP wheel studs
- 2 5/16" wheel spacers for the front
- 1 5/16 spacers for the rear wheels
- Rksport front upper strut bar
- Rksport Front lower subframe bar
- Vibrant rear upper strut bar
- Addco rear sway bar
- Addco front sway bar
- GM stock front lower sway bar
- Poly urethane control arm bushings
- Addco Polyurathane Swaybar Endlink Bushings.
Interior:- Aem wideband
- Z series black Boost gauge
- Z series black Oil pressure gauge
-
- black NRG steering wheel
- momo hub.
Exterior:- VIS CF Turbosport hood
- Shaved locks
- Import fighter front
- Import fighter sides
- 03+ LLS rear bumper
- Toyota 95-99 tail lights
- Converted to 95-99 crystal clear headlights
- black corners.
Future:- Custom tubular turbo manifold
|
|