does anyone have a pic of their engine with the weapon r intake w/ dragon filter on it....im curios as to how it looks on the car sincei just ordered one....cuz i got ripped off on my AEM one....dont buy from Nicky G!
weapon -R intake sucks, just wait till you get it and you look inside the elbow, there nice quality casting has the finish about as smotth as a moutain range, flows real well
Darkstars wrote:weapon -R intake sucks, just wait till you get it and you look inside the elbow, there nice quality casting has the finish about as smotth as a moutain range, flows real well
Yeah, I dremeled all that chit out just to find that the kit did not come with the right couplers. the next day AEM needs a car to revise the intake, so I jump on it recieving a CAI.
Guess it worked out for the best.
^^Home made sig^^ ghetto, I know.
http://members.cardomain.com/blackoutfire
I ported and polished the elbow on mine as well, my cuoplers were also wrong and becarefull with the thick piece of hose that goes form the intake to cam coover, where it goes onto the cam cover it will split down the side so keep an eye on it
How close is that to the hood off the throtle body? It seems close.
Quote: no ofence man but if you have so much experience in all that why does your car look like crap?
pretty tight....i had the clamp turned up so the bolt was facing the hood and it put a nice in the hoodlines, so i turned it down, and now theres no rub, but not much clearance whatsoever
Is any one else's weapon r intake scatching there fuse box, or is it just mine, and i have to slam my hood to get it closed, any advise about thses problems
Beware the Rouge Dragon.
i had that problem initially, just make sure you pushed the tube into the coupler as far as you can and you should ghave about 1 cm of room between,
Dont buy it. End of story its a crap intake if not modified. Id look into getting an aem intake stick with that brand they have quality components. Or you could Think about Turbo
I enjoy that intake setup the best
*2012 mazdaspeed3*
what does ecotec stand for and how do i make my 2003 cavalier a little more powerful without spending a lot of money can you help me out at all email me at chevy03racer@yahoo.com
Thanks
Robbie
Dude, how do you keep your engine compartment so clean, I have 52xxx miles on my car, and the compartment is filthy.
Hey Bertland, - is your valve cover polished, or chromed?
Looking great!
-Mike
SoCalHHR's
-Mike
SoCalHHR's
www.socalhhrs.com
Mike Pope wrote:Hey Bertland, - is your valve cover polished, or chromed?
Looking great!
-Mike
SoCalHHR's
It polish, I have it done from my friend, he have a Chrome & polishing shop
Club J-Body Delta of Quebec, Montreal Division Event Planner
My Car Domain
Mon Char.Com
WEAPON R intake
SUX it dentedf my hood bc of little clearance.....when the engine torque....starting or matting it it smacks the hood....Wearpon R was very uncooperative about this problem.....had to fabricate new intake form old box on throttle body i will post pics soon
BERTLAND how did u paint the plastic part of your aem intake that looks awesome and i would like to do that to mine myself? do i just primer sand n paint ? thanks
i think the aem intake has a nasty bend right before that robs you of good air flow.
BERTLAND your center console,dash, and plastic piece on the aem intake look awesome, i have painted my interior but all i did was just just tape it off and paint, how did you get it soo smooth and to look so good? i mean did u primer sand paint and clear coat? if you could hook me up man that would be awesome i am not that experienced with painting and just want to know how it looks soo good, thanks
Alex
alexstevie6336@yahoo.com
well hey thanks man I appreciate it did u do the same thing with your interior cause that looks sick did u just primer it sand alot and paint, and if you used a clearcoat how did u use it? i dont have a spray gun for clear coat and was wondering if there was a aerosol can i could buy ? Thanks Bert
well hey thanks man I appreciate it did u do the same thing with your interior cause that looks sick did u just primer it sand alot and paint, and if you used a clearcoat how did u use it? i dont have a spray gun for clear coat and was wondering if there was a aerosol can i could buy ? Thanks Bert
[FONT="Arial Black"][SIZE="4"] Click to see My CARDOMAIN Page 