i need a mani for a t3 turbo who makes a good manifold and how much will it set me back

I answered this question in the FAQ I wrote up: http://www.ecotecforum.com/forums/showthread.php?t=1024

FAQ wrote:Question: Where can I buy a turbo manifold from? Is there anything I should look out for when buying a turbo manifold?

Depends on what type of turbo you’re using. You can buy a Hahn manifold, they sell manifolds on ebay. There are random places that sell manifolds for the ECOTEC. You can also use the 2003+ Saab 9-3 2.0 ECOTEC Turbo manifold, which has a triangular flange for a Mitsubishi turbo (they come with a TD04 Mitsubishi turbo).

Now, what you should look for is whether it has a flange for an external waste-gate or not. If you are planning on running an external waste-gate and have a turbocharger without an internal waste-gate, this is very important to look for. If you have an internally waste-gated turbocharger, you can actually buy whatever manifold you find for sale. If it has an extension, you can just find a way to block the opening but it’s just less hassle to find one without an extension. Also, if you do have an external waste-gate, make sure that the flange on the waste-gate and the manifold are the same size and type.

- Picture Examples on Page -

www.kronosperformance.com / 732-742-8837

i hav a t 3 t 4 with an internal wastegate

ok this what im doing i have cobalt ss cams fuel infectors t3 t4 turbo im having a custom 3 inch down pipe made to a stainless 3" high pressure inline fuel pump with a regulator and a turbo timer and boost controler and relocating the battery to the trunk and putting a mustang svo intercooler in its place with a fan to draw air into it and a vent going to be placed in my hood so air can be drawn into the intercooler sorry i was short on info soo i hope this helps a little bit more thanks for the help!!!

No problem


www.kronosperformance.com / 732-742-8837