Just installed Chill Factory Intake Manifold, yeah I know you Hahn guys might rip this, but it is a definite air flow increase over stock especially with that 75mm throttle body on it.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
Don't know if you guys will be able to see the pic in the post, but there is a pic on my profile page, if was taken with my phone so it's not the greatest but you get the idea.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
75 MM is huge for any ECOTEC...
Tell me that you're turbocharged with alot of boost.
www.kronosperformance.com / 732-742-8837
i think ive met you before how is the car and when are they going to produce all these prototype parts they have coming out
Yeah it's turbo running 12psi, the car runs fantastic, now. There are still a couple issues to be worked with the manifold, like as of right now you have to remove cruise control simply because we didn't spend a whole lot of time trying to figure out how to make it work, but mine was already removed so I could run my boost pipes over the top of the engine instead of underneath. Although the throttle body does have a pin so the cruise can be hooked up, we just need to make a bracket to accomodate the cruise cable. A production model of the manifold/throttle body combo should be available in the next month or so, I'll make a post when they become ready.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
hey eli the parts from my car are at the shop so the kit will be available by the end on January. not sure on the price of everything but i know it will be very close to the price from HRC.
12.7@110MPH with 10PSI.
thats the pic
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
Thanks for getting the pic on the forum for me, btw running 14psi now! I know the pic isn't the greatest but you guys get the idea.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
